A Rapid Palatal Expander (RPE) is a dental appliance used to widen the upper jaw (maxilla) in order to create more space and correct certain bite issues. It is commonly used in orthodontic treatment, especially in cases where there is a narrow upper jaw or a crossbite.

Here's how a Rapid Palatal Expander works and the process involved:

1. Evaluation and planning: The orthodontist or dentist will conduct a thorough examination, which may include dental impressions, X-rays, and photographs, to assess the patient's bite and jaw alignment. Based on the evaluation, they will determine if a Rapid Palatal Expander is necessary and appropriate.

2. Placement of the expander: The Rapid Palatal Expander is custom-made to fit the patient's mouth. It consists of two halves connected by a screw mechanism in the middle. The appliance is cemented or bonded to the back teeth (usually the premolars or molars) on both sides of the upper jaw.

3. Activation of the expander: Once the expander is in place, the screw mechanism is activated. The patient or their parent/guardian is instructed on how to turn a key or knob at regular intervals, typically once or twice a day. The activation process gradually widens the expander, creating tension on the palatal bones and causing them to move apart.

4. Adjustment and monitoring: The orthodontist or dentist will schedule regular appointments to monitor the progress and make necessary adjustments to the expander. These adjustments ensure that the expansion is gradual and controlled, avoiding any discomfort or potential issues.

5. Retention phase: After the desired expansion is achieved, the Rapid Palatal Expander is typically left in place for a period of time to allow the new bone to form and stabilize. This helps to maintain the expanded width of the upper jaw. Depending on the individual case, a removable retainer or other orthodontic appliances may be used to maintain the results.

6. 
   

Fortis Dental Laboratory is one of the larger and high-quality dental laboratories in China.we always pays attention to high quality and efficiency, in order to make better quality as the core, and satisfy better the high-end requirements of the global customer group. The laboratory has more than 300 technical personnel, and the laboratory area is more than 5000 square meters.

We make Emax Laminate Veneers,Emax crowns,Inlay and Onlay,Zirconia crowns, Implant crowns,Orthodontic Retainer,PFM,Flexible dentures, Acrylic dentures, Co-cr partial dentures,Vitallium partial dentures, Valplast,Snap on, Hard/Soft Guard,All on 4,All on , clear aligners…

Fortis Dental Laboratory has introduced more than 100 equipment for the production of dentures, including advanced scanners, 3shape scanners, German bredent grinding machines, German MVK grinding machines, Invoclar porcelain oven, resin model printing equipment, metal printing equipment, five-axis lathes, base bench production lathes, All on 4/6 production equipment...

We have high requirements for material suppliers, focusing on the higher quality and effect brought by materials, and never using cheap materials. The material we use include: Vita Invoclar Erkodur E max TCS Yeti DFS Vertex Aidite Wieland 3MLAVA Cercon Densply Sirona Keystone...

Welcome to Fortis Dental Laboratory to visit and guide the exchange, give us a chance to cooperate, we will try our best to make your quality and efficiency get better protection!